MELWASH 1/7
Ultra-concentrated professional moss & algae removal treatment

Long-lasting moss and algae removal
MELWASH 1/7 is an ultra-concentrated professional moss and algae removal treatment specifically developed for roofs, facades and outdoor surfaces.
Its advanced formula is designed for both preventive and curative treatment against moss, algae, lichens and fungi.
MELWASH 1/7 works gradually and penetrates the treated surface, providing long-lasting protection against regrowth without the need for rinsing.
Free from chlorine bleach, acids and solvents, it is suitable for a wide range of building materials, including sensitive surfaces and historic buildings, subject to material compatibility and authorised conditions of use.
Available exclusively to professionals in 20-litre containers. Volume discounts are available depending on the quantity ordered. Prices are available upon request by email.
Key benefits at a glance
-
Professional moss and algae removal treatment
-
Ultra-concentrated formula with long-lasting action
-
Preventive and curative treatment
-
Free from chlorine bleach, acids and solvents
-
Suitable for compatible sensitive materials and historic buildings
-
No rinsing required - gradual, deep-acting treatment
-
Helps prevent moss and algae regrowth
Areas of application
MELWASH 1/7 is suitable for a wide range of compatible exterior surfaces:
-
Roofs: roof tiles, slate, concrete, terracotta and fibre cement
-
Facades: brickwork, render and natural stone
-
Outdoor surfaces: patios, driveways and pathways
-
Other applications: tennis courts, awnings and sunshades
Always carry out a preliminary compatibility test and follow the authorised conditions of use.
Application and dilution instructions
-
Shake well before use.
-
Dilute 1 part MELWASH 1/7 with 7 parts water.
-
Apply evenly and generously until the surface is saturated.
-
Leave the product to work. Do not rinse.
-
For thick layers of moss, brush the surface beforehand.
Application conditions:
-
Allow at least 6 hours of dry weather after application at 20°C.
-
Apply at temperatures between +5°C and +30°C.
-
In hot weather, lightly dampen the surface before application.
-
Do not apply in rainy conditions.
Average coverage: 3–5 m² per litre of diluted solution.

Safety information
-
Hazard pictograms: GHS05 – GHS07 – GHS09
-
Signal word: DANGER
-
H302: Harmful if swallowed.
-
H314: Causes severe skin burns and eye damage.
-
H410: Very toxic to aquatic life with long lasting effects.
Always wear suitable protective gloves, protective clothing, eye protection and face protection.
Avoid release to the environment.
For professional use only. Consult the safety data sheet before use.
Use biocides safely. Always read the label and product information before use.
Technical specifications
-
Physical state: liquid
-
pH: approximately 9
-
Odour: characteristic
-
Density: 0.99 ± 0.01 kg/dm³
-
Solubility: water-soluble
-
Dilution ratio (product to water): 1:7
-
Packaging: 20-litre container
-
Storage temperature: +5°C to +35°C
-
Shelf life: 24 months
Why choose MELWASH 1/7?
-
Specifically developed for professional cleaning and surface treatment
-
Effective against moss, algae, lichens and fungi
-
Long-lasting action without chlorine bleach or aggressive acids
-
No rinsing required under standard application conditions
-
Cost-effective thanks to its ultra-concentrated formula
Need technical advice, a tailored quote or a product demonstration?
Our team can help you select the right professional cleaning products and equipment for your roof, facade and exterior cleaning applications.
Contact us for more information, with no obligation.
.png)