MELDEG 1/10
Ultra-concentrated professional degreaser & cleaning booster for stubborn dirt

High-performance industrial degreaser
MELDEG 1/10 is an ultra-concentrated professional degreaser specifically developed to remove stubborn contamination, including lubricating oils, grease, hydrocarbons and black soot marks.
Suitable for a wide range of surfaces and professional cleaning applications, it can be used as a standalone degreaser or as a cleaning booster in combination with compatible moss removal treatments, such as MELWASH 1/7.
Its powerful, acid-free formula leaves no residue after rinsing. Thanks to its high concentration, MELDEG 1/10 combines excellent cleaning performance with economical consumption.
Available exclusively to professionals in 20-litre containers. Volume discounts are available depending on the quantity ordered. Prices are available upon request by email.
Key benefits at a glance
-
Heavy-duty professional and industrial degreaser
-
Effectively removes oil, grease, hydrocarbons and soot
-
Suitable for a wide range of materials and cleaning applications
-
Can also be used as a booster for moss removal treatments
-
Ultra-concentrated formula with adjustable dilution ratios
-
Leaves no marks or residue after rinsing
-
Acid-free formulation

Areas of application
MELDEG 1/10 is particularly suitable for cleaning:
-
Metal facade cladding and steel panels
-
PVC surfaces and painted aluminium
-
Tile joints darkened by ageing or weather exposure
-
Vehicles, including construction machinery and passenger cars
-
Kerbs and paved surfaces affected by tyre marks
MELDEG 1/10 can also enhance the cleaning performance of compatible moss removal treatments on heavily soiled roofs.
Application and dilution instructions
MELDEG 1/10 can be used undiluted or diluted, depending on the type and severity of contamination.
-
General cleaning: dilute at a ratio of up to 1:10
-
Coloured or sensitive surfaces: dilute at a ratio of up to 1:20
-
Application by spraying, sponging or soaking
-
Average contact time: approximately 10 minutes
-
Always rinse after 10 minutes, preferably with pressurised water where suitable for the surface
-
Application temperature: between +5°C and +30°C
Important:
-
Always perform a compatibility test on a small, inconspicuous area before application.
-
Avoid application on light metal alloys, untreated aluminium and older vehicle bodywork.
-
Avoid direct contact with glass surfaces and solar panels. In the event of accidental contact, rinse immediately.

Technical specifications
-
Physical state: liquid
-
Chemical properties: alkaline
-
Solubility: water-soluble
-
Packaging: 20-litre container
-
Shelf life: 24 months
Safety information
-
Hazard pictogram: GHS05 (corrosive)
-
Signal word: DANGER
-
H314: Causes severe skin burns and eye damage.
Safety precautions:
-
Always wear suitable protective gloves, protective clothing, eye protection and face protection.
-
Do not inhale vapours or spray mist.
-
Read the product label and safety data sheet before use.
Use as a cleaning booster
For heavily soiled roofs, MELDEG 1/10 can be used to enhance the effectiveness of compatible moss removal treatments.
Recommended dosage: a maximum of 10% relative to the ready-to-use moss removal solution.
Always confirm the specific application and rinsing instructions for the combined treatment before use.
Why choose MELDEG 1/10?
-
Specifically developed for intensive professional cleaning applications
-
Highly effective against stubborn oil and grease contamination
-
Versatile application as a standalone degreaser or cleaning booster
-
Suitable for a wide range of compatible surfaces
-
Cost-effective thanks to its ultra-concentrated formula
Need technical advice, a tailored quote or a product demonstration?
Our team can help you select the right professional cleaning products and equipment for your specific cleaning applications.
Contact us for more information, with no obligation.
.png)